Critical Environment Technologies PDC Series Especificaciones descargar pdf (Pagina 6)

2.0 SPECIFICATIONS, CONT’D…..

c) EXTERNAL POWER SUPPLY

Physical: 6.5” (165 mm) wide X 8.25” (209 mm) high X 5.31” (84 mm) deep

Materials: Rugged, heavy wall pvc with secured, hinged door and Lexan

label

Indicators: Internal:

External: None

Environmental: Temperature: 0 deg. C to +40 deg. C (32 deg. F to 104 deg. F)

Power: 120 VAC, 60 HTZ.

Circuit: Programmable microprocessor

Fuse: One integral, automatic resetting thermal fuse

3.0 INSTALLATION

The same rugged, pvc enclosure has been utilized for all three peripheral devices

indicated in this manual. Four 3/16” diameter mounting holes can be located at the

corners inside the enclosure base. Take caution when using installing tools inside

system enclosure to avoid damaging internal components. In tight mounting areas,

allow enough room to swing the door of the enclosure open, for connections and ser-

vice access

If security is a concern, the pvc enclosure has a hole, located just below the securing

door screw, to attach a padlock.

Note: If required to facilitate installation, the door of the enclosure can be removed. To

achieve this, carefully grasp the bottom edge of the door and push on it. It will “snap”

off the base hinges. To reinstall it, align it behind the base hinges and “snap” it back

into position.

5.1 ANALOG OUTPUT MODULE PROGRAMMING CODES

RANGE

MONITOR CALIBRATE

CODE

>>>>

3231

3232

1321

1322

2333

3113

3112

1331 1332

CHAN-

NEL

ON/

OFF

CODE

LOW\

RANGE

HIGH

RANGE

ACTI-

VATE

SEN.

ZONE

LOW

LIMIT

HIGH

LIMIT

1 2 3 4 5 6 7 8

Comentarios a estos manuales

Sin comentarios

Critical Environment Technologies PDC Series Especificaciones Pagina 6

Comentarios a estos manuales

Relacionado con productos y manuales para No Critical Environment Technologies PDC Series